How to Make Distilled Water at Home Without a Distiller

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

There are many reasons you may want to make distilled water. I needed to make some because my car battery needed to be topped up with water, and I read that it is best to use distilled water to do this. After doing some research, I found out that it was relatively simple to do this, so I went ahead and gave it a try.

What You'll Need

  • A stainless steel pot
  • A heatproof bowl
  • A glass pot lid, larger than the pot you are using
  • Water
  • Ice

(Note: Regular chunks of ice from an ice-maker are fine, but a large block might be easier. I filled an ice cream container with water and froze it, making a nice, large block of ice that worked well.)

Step 1: Fill Your Pot With Water

This first thing that you want to do is fill your pot with water. Just regular tap water is fine. I filled mine about a quarter of the way.

You need to leave enough room in the pot so that you bowl can float on top of the water but still have room to place the glass lid on top of it.

Step 2: Place Your Bowl Inside the Pot

The next step you need to do is place your bowl inside the pot. Like I said earlier, the bowl must be heatproof. I used a stainless steel bowl, but you can also use a heat proof oven bowl.

The bowl must float on top of the water and should be smaller than your pot, or else it will not fit inside. This is where your distilled water will end up.

Step 3: Cover Your Pot With a Glass Lid

Now you need to cover your pot with a glass lid and bring the water to a boil. The glass lid must be placed upside down, as we will be placing our ice on top of it in the next step.

You also want to make sure that if there is a hole in your glass lid that it is covered or that it is sitting on the outside of the pot. You do not want the water that melts from the ice to drop down into your bowl.

Step 4: Place the Ice on Top of Your Glass Lid

Now that your water is boiling, you want to place your ice on top of the glass lid. The steam that rises will hit the cold glass lid, which will cool it down and turn it back into water droplets.

The droplets will fall down into the bowl below, and you will have your distilled water!

(Note: You may also need to remove the water that forms on top of the lid every now and then as the ice begins to melt.)

The video below shows you step-by-step instructions on how to carry out this process.

Mitchyboy (author) on June 25, 2018:

Thanks glad it helped

Maurice Glaude from Mobile, AL on June 18, 2018:

Wow, that's much more complicated than boiling water, but I'm proud to say I know how to distill water now.

Watch the video: Megahome V Waterpure Water Distiller Review


  1. Gujas

    I still know one solution

  2. Colten

    It is a pity that I cannot speak now - I have to leave. I will be released - I will definitely express my opinion.

  3. Serena

    We picked up a lot, ATP.

  4. Vudolabar

    attractive question

Write a message

Previous Article

Landscape equipment for rent near me

Next Article

Landscape design and maintenance fransico